Louise MFT 1/8 Scale Pioneer Stadium Truck Wheels & Tires

Louise MFT 1/8 Pioneer Stadium Truck Wheels & Tires – Unleash the Speed!

“Unleash your inner wanderer with the Echo Nomad – a handcrafted journal designed to capture every sun-drenched memory and whispered dream. This isn't just paper; it’s a portal to your personal adventure, boasting thick, luxurious pages perfect for sketching, jotting down wild ideas, or simply breathing in the beauty of the moment. Each Echo Nomad features a durable, weathered leather cover, hinting at journeys both near and far. Start writing your legend today.”

$38.48 $76.95

num:

description

Louise RC MFT ST

Due to the extreme loads during driving, cornering and high jumps, the design of the wheel and the materials used are extremely important. The proper flexibility and strength allow the Louise RC wheels to withstand these heavy forces.

The Louise RC wheels are made of a mixture of high quality nylon granulates, charged with fiber or without. These composites have been specially developed by Dupont for Louise RC.

The stadium truck tyres are about 20mm more narrow than the Monster truck tyres. The outer diameter is similar. The stadium truck tyres have the advantage to be lighter and to reduce the load on the transmission as well as on the suspension.

Compatibility

Most 1/8 Stadium and Monster Trucks with 17mm wheel hex adapter

Arrma - Kraton
Arrma - Outcast
Arrma - Notorius
Arrma - Talion
Hobao - Hyper MT
HPI - Savage X4.6
HPI - Savage Flux
HPI - Savage XL
HPI - Trophy Truggy
Team Corally - Kronos
Team Corally - Dementor
Team Corally - Shogun
Traxxas - E-Maxx Brushless
Traxxas - Revo 3.3
Traxxas - E-Revo Brushless

Tyre inserts

The tyres are mounted either with special preformed foam inserts or with cut-to-size foam inserts. The inserts are selected in a specific density and size in order to guarantee perfect dampening and form stability of the tyre.

Mounted - Glued

Due to the extreme forces the tyre must firmly bonded to the wheel. Louise RC takes the highest care in bonding the tyres properly. For years they have been searching to find the best way to glue the tyres well but also in a clean way. Today Louise RC is considered one of the best in the RC industry. The tyres are glued with a special rubber cyanoacrylate glue. This glue has been specially developed for Louise RC to guarantee a perfect firm bond to withstand all extreme forces.

The following steps are performed in production at Louise RC in order to obtain a perfect bond

The rings of the rubber tyre to be glued are slightly grinded and degreased.
The surface of the wheel where the tyre will be glued is grinded up and degreased.
The tyre is bonded to the wheel with cyanoacrylate adhesive using a special dosing machine. As a result, the equal amount of glue is always applied.
The bonded tyre is pressed for a specific time in order to ensure perfect bonding and curing.
Each tyre passes a spinning and pulling test to ensure perfect bonding.

MFT Technology

MFT stands for Micro Fiber Technology. This technology indicates the presence of a textile belt in the rubber tread of the tyre to prevent the tyre from deforming and ballooning during high speed operations.

The MFT technology keeps the tyre in shape, even during powerful accelerations and high-speed runs.

The well-known ballooning of a normal tyre without MFT technology that disturbs the entire shape and where the diameter of the tyre changes under these extreme conditions, is now part of the past. The MFT Technology provides increased stability, significant more road contact and the tyre life is extended.

Important

The tyre with MFT technology is usually a bit heavier and larger in size then normal tyres without the MFT technology. We recommend to check your gear ratio and adjust if needed. We also recommend to update your steering servo as these tyres provide more grip and may overload a standard servo.